1. HOME
  2. Products
  3. TDR (Impedance) Tester
  4. Line Up
  5. MZPC30 / MZPC50

MZPC30/MZPC50

MZPC30/MZPC50

High performance, low cost measurement meter with improved rise time of 30ps.

Specifications
Rise Time30-40ps(MZPC30) / 50-70ps(MZPC50)
Aberrations+7%, -5%, total of 10% P-P*1
+2%, -2%, total of 3% P-P*2
Amplitude+250mV, -250mV differential
Jittermax.10ps RMS
Pulse Durationmin.25ns repetition at 100ns
Edge Delaymin. 1ns from sweep start
Impedance Accuracy50Ω±1%
ControllerWindows PC(standard)
SoftwareMeasurement software with Multi Point Calibration Function.(standard)
Standard AccessoriesSMA Cable, Single-end Probe, Wrist Band
Optional AccessoriesElectrostatic Protector, Rotary Joint, Probe Holder
Time Base Accuracymax. 5%
Dimensions (HxWxD) *47 x 7.9 x 11.8" (180x200x300mm)
*1Within the first 1ns with reference level at 1ns from the step edge
*2After the first 1ns with reference level at 1ns from the step edge
*3Holds well within 23°C ±1°C of temp. at the time of 50Ω calibration.
*4Dimension and appearance of MZPC may change.
Display(XGA+) is optional.
Operating condition
Operating condition · Operating Conditions:
70-75°F (21-24°C), 30-70% relative humidity
No condensation, dust, vibration nor any corrosive gas
· Atmospheric Dew Point: -14°C or below (at 0.7Mpa, dew point is 15°C or below)
· Oil Mist Concentration: 1mg/㎥ (ANR) or below