1. HOME
  2. Products
  3. TDR (Impedance) Tester
  4. Line Up
  5. HTA2525

HTA2525

HTA2525

Equipped with built-in full automation

Equipped with built-in full automationOperator needs only to place the boards onto the stacker, rest the machine shall automatically transfer the boards for testing. After testing, boards can be separated to PASS and FAIL boards.

Specifications
Max. Test Area9.8 x 9.8" (250x250mm)
Min. Board Size2.4 x 3.1" (60x80mm)
Max. Board Thickness0.06" (1.6mm)
Clamp SystemVacuum Style
Max. Stack50pc (based on thickness of 1.6mm)
Rotate Radius360°
Repeatable Accuracy X-Y±0.4mil (±10µm)
Repeatable Accuracy θ-
Impedance Accuracy*150Ω±1%
AirN/A
Power SupplyThree Phase AC200V 50/60Hz
AC220V 60Hz 8A (including vacuum pump)
Weight529lbs. (240kg)*2
DimensionsDimensions
*1Calibration allows room temperature variation of ±2°C.
*2Machine: 441lbs.(200kg), Vacuum pump: 88lbs.(40kg)
Common System Requirements
System Requirements 1) Control PC & Monitor
2) Meter
  • [ Tektronix ] DSA8300, DSA8200, TDS8000, 11801B/C
  • [ Keysight Technologies (formerly Agilent Technologies) ] E5063A option TDR, E5071C+ENA option TDR, 86100A/B/C, 54750
  • [ Teledyne LeCroy ] WaveExpert100H+ST-20
  • [ MicroCraft ] MZPC30/50
Please contact our sales for details. Meters to be purchased separately.
Operating condition · Operating Conditions:
70-75°F (21-24°C), 30-70% relative humidity
No condensation, dust, vibration nor any corrosive gas
· Atmospheric Dew Point: -14°C or below (at 0.7Mpa, dew point is 15°C or below)
· Oil Mist Concentration: 1mg/㎥ (ANR) or below