1. HOME
  2. Products
  3. On-demand InkJet Printing System
  4. Auto Loader/Unloader

Auto Loader/Unloader

Auto Loader/Unloader

CraftPix increase throughput by option of connecting to automation

2 Types of Loader/Unloader Optional

Stacker Type
Loader and unloader are connected to each side of CraftPix to perform continuous automated operation. Boards are set into Loader stacker, then a transfer arm secures the board with vacuum and transfers it to CraftPix. Once printing is completed, board is immediately unloaded and put into the Unloader stacker.
Stacker Type

Conveyor Type
Customers' loader and unloader can be connected to MicroCraft conveyor. It can be integrated with various material handling equipment that customers use. Board is transferred from customer loader to designated position on MicroCraft conveyor for alignment. Then the transfer arm secures the board with vacuum and transfers it to CraftPix. Once printing is completed, board is immediately unloaded and the conveyor places board into next staging area.
Conveyor Type

Auto-loader Specification
TypeStacker typeConveyor Type
Max. Trasferable Board Size24 x 20" (610x510mm) *124 x 20" (610x510mm) *1
Min. Trasferable Board Size15.7 x 13" (400x330mm) *215.7 x 13" (400x330mm) *2
Trasferable Board Thickness0.024-0.12" (0.6-3.2mm)0.024-0.12" (0.6-3.2mm)
Passline
(board setting height)
32.9" (835mm) *332.9" (835mm) *3
Stackable Amount
[height]
200
[7.9" (200mm)] *4
N/A
Power supplySingle Phase 220V 2A 50/60Hz *5Single Phase 200V 2A 50/60Hz *5
Air supply: Pressure0.5MPa0.5MPa
Air supply: Consumption18ft³/min. (500ℓ/min)18ft³/min. (500ℓ/min)
Weight1764lbs. (800kg)1653lbs. (750kg)
Dimensions
[Unit: inch(mm)]
Stacker type
Dimensions
Conveyor Type
Dimensions
*1 Size securable by vacuum plate. *2 Size securable by automated 4 edge side clamp + vacuum. *3 Can support loading and unloding device of customer. *4 When board thickness is 0.039"(1mm). *5 CraftPix converts the voltage and supplies the power. [ Auto-Loader Operating Conditions ] · 70-75°F (21-24°C), 30-70% relative humidity Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas.
· Atmospheric Dew Point: -14°C or below (at 0.7Mpa, dew point is 15°C or below) · Oil Mist Concentration: 1mg/㎥ (ANR) or below §Please contact MicroCraft for detailed specification.