1. HOME
  2. Products
  3. On-demand InkJet Printing System
  4. Line Up
  5. CPS

CPS

CPS6151 CPS7861
CPS6151 CPS7861

CPS uses a special ink pouch for supplying ink to the print head unlike the regular supply tanks used in other CraftPix models. This model is most suitable for customer using multiple types of inks in small quantity for making experiment lot or using highly expensive inks such as silver nano ink.

Specifications
ModelCPS6151CPS7861
Max. Printing Size24 x 20" (610x510mm)30.7 x 24" (780x610mm)
Max. Discharge
Frequency
45kHz
X-axis resolution (dpi)360 / 720 / 1080 / 1440
Y-axis resolution (dpi)360 / 720 / 1080 / 1440 / 1800 / 2160
Min. Droplet size6pl / 13pl
Number of nozzles1024 (1024 x 1)
Standard resolution720dpi
Min. line width *170µm - 90µm
Speed *222.8x17"
(580x430mm)
35 seconds
24x20"
(610x510mm)
48 seconds
30.7x24"
(780x610mm)
64 seconds
Number of ink tank1
Ink Tank Volume (Max.) 100ml
On-Head UV LampMetal halide lamp or LED-UV lamp
Air supply:Pressure0.5MPa
Air supply:Consumption2.7ft³/min. (75ℓ/min.)
Power supply*3Single Phase 200-240V 20A 50/60Hz
Weight1543 lbs. (700kg)2205 lbs. (1000kg)
Dimensions (CPS6151)
[ unit: inch(mm) ]
Dimensions (CPS6151)
Dimensions (CPS7861)
[ unit: inch(mm) ]
Dimensions (CPS7861)
*1 Depends on ink *2 While using UV pinning type ink, speed spec may change according to required UV energy. Print times do not include image alignment, shuttle and load and unload time. Please confirm the printing quality and speed by allowing us to run a benchmark test at MicroCraft. *3 Separate power source for cooling device and vacuum pump is necessary (specifications may be different in some countries).
[CraftPix Series Operating Conditions] · 70-75°F (21-24°C), 30-70% relative humidity · Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas. · Atmospheric Dew Point: -14°C or below (at 0.7Mpa, dew point is 15°C or below) · Oil Mist Concentration: 1mg/㎥ (ANR) or below
§Replacement of ink requires special training §CraftPix consumables are ink, cleaning fluid, filter, sending fluid tube, UV lamp, array unit, vacuum paper, temperature sensor, heater, etc. §Please contact MicroCraft for detailed specification.
CraftPix General Specification
Board Thickness0.004" to 0.24" (0.1-6mm)*
AlignmentCCD Camera
MonitorLCD Monitor
SoftwareWindows 7 / Windows 8 / Windows 10
Data Input FormatRS274X, RS274D, ODB++, DPF, DXF, BMP**, TIFF**
* When the vacuum table is used. Figures depend on the board warpage and clamp type. Printing quality may decrease with warpage. Please contact MicroCraft for more precise figures for specific conditions. ** Scaling and alignment functions are not usable.
Vacuum Pump
Power SupplyThree Phase AC200V 10A 50/60Hz, AC220V 10A 60Hz
Capacity50Hz: 20.7ft³/min. (575ℓ/min.)
60Hz: 24.7ft³/min. (685ℓ/min.)
Air Coupler SizeRC 3/4
Weight187.4 lbs. (85kg)
List of Supported Ink
Legend Ink
AGFADipamat Legend ink Wh04
Dipamat Legend ink FWh01
Dipamat Legend ink Bl01
CUR-BFI 001, Dipamat Legend ink Ye01
TAIYO INK MFG. CO., LTD.
(TAIYO HOLDINGS CO., LTD.)
IJR-4000 MW301N, IJR-4000 MW301SW
IJR-4000 LW100, IJR-4000 MW400
IJR-4000 FW100, IJR-8000 FS100E
IJR-4000 EM100, IJR-4000 YE100
Etch Resist Ink
AGFADipamat Etch Resist ER01
Goo Chemical Co., Ltd.PER-410, PER-500, PER-520, PER-605
TAIYO INK MFG. CO., LTD.
(TAIYO HOLDINGS CO., LTD.)
IJR-3000 GE100
MacDermid Incorporated.CircuitJet 200
Plating Resist Ink
Goo Chemical Co., Ltd.PER-700
TAIYO INK MFG. CO., LTD.
(TAIYO HOLDINGS CO., LTD.)
IJR-3000 BE100
Solder Resist Ink
AGFACUR-SM001
TAIYO INK MFG. CO., LTD.
(TAIYO HOLDINGS CO., LTD.)
IJSR-4000 TR70204, IJSR-4000 JM01E
IJSR-4000 JM01C
MicroCraft K.K.MPJ100-SG01, MPJ100-SW01, MPJ100-SB01
* Please contact MicroCraft for further details.