1. HOME
  2. Products
  3. Moving Probe Tester
  4. Line Up
  5. F4H4033AL

AL Series

F4H4033AL

High accuracy testing with full automation is available in this model. Instead of using robotic picking method for board transfer, inline conveyer-belt is implemented. By correctly adjusting the height and speed of conveyer it gives the option of connecting our full automation to other inline equipment from other manufactures. Also, by using the optional Automatic Size Adjustment Function, necessary size information for conveyer rail in test area and location of suction pad can be preprogrammed to offer unattended 24 hours testing.

Medium and High Volume Production Model with Auto Loader

Boards Transfer Method: Conveyer Method
Max. Stackable Boards
AutoLoader: 400pcs
(when board thickness is 1.6mm. Max. stackable weight: 80kg)
Unloader: PASS Boards 400 pcs, FAIL Boards 400 pcs (when board thickness is 1.6mm. Max. stackable weight: 80kg)
Inclusion of stamp unit is available (Optional).
Supports multi-image boards

Conveyor method

* Multiple boards with different size may be stacked at same time.
* Stackert may be separated to devide into PASS and FAIL boards.

Specifications
Max. Test Area15.7 x 13" (400x330mm)
Max. Transferable Panel Size16.5 x 13.4" (420x340mm)
Number of Probes2 Upper, 2 Under
Min. Board Size2 x 2" (50x50mm) *1
Min. Transferable Panel Size3.9 x 3.5" (100x90mm)
Board Thickness for Clamping0.02-0.12" (0.5-3.0mm) *2
Max. Transferable Weight2.2lbs. (1kg)
Clamp Margin0.12" (3mm)
Untestable Area0.079" (2mm) from Clamp Margin *3
Repeatable Accuracy±0.12mil (±3µm)
Resolution0.08mil (2µm)
Min. Pad Pitch *42.4mil (60µm)
Min. Pad Size *51.2mil (30µm)
Test Voltage of Resistance MeasurementContinuity test: 0-10V
Isolation test: 250V(500V/1000V option)
Test Current of Resistance Measurement Continuity test: 2.5µA-150mA
Clamp SystemPneumatic
CCD Camera2 Upper, 2 Under
Printerinternal
Air Requirements Pressure: 0.5MPa, Consumption: 10.6ft³/min.(300ℓ/min.)
Power Supply *615A (Single Phase AC200-240V 50/60Hz)
Weight 5622lbs. (2550kg)
DimensionsDimensions
*1Min. size that can be clamped by the tester section.
*2Board warpage shall be below 0.4mm for 100mm size when board is held horizontally at either end.
*3With needle probes. Value shall change when other probes are used.
*4With T96MC-PB-0R40 probe.
*5With T96MC-PB-0B00 probe.
*6Power Supply: There may be cases with inrush current equaling to 10 times of the rated and flowing when the power is turned ON. Please choose the breaker that will not cause any malfunction by such inrush current.
System Requirements
System Requirements1) Control PC & Monitor
2) PC & Monitor for Test Data Editing.
1) and 2) can be completed in one PC.
* Please inquire our sales for PC specification.
Probe TypeUsers can choose one of different types of probes depending on tester models. Please ask our sales for specifications of each probe & PC.
SoftwareEMMA2010 for Control PC is included,
but all other software is optional (supporting OS are
Windows 7 / Windows 8 / Windows 10).
Operating Conditions· 70-75°F (21-24°C), 30-70% relative humidity
Do not use under the environment that has heavy condensing, dust, vibration, and/or corrosive gas.
· Atmospheric Dew Point: -14°C or below (at 0.7Mpa, dew point is 15°C or below)
· Oil Mist Concentration: 1mg/㎥ (ANR) or below