2. Products
  3. Moving Probe Tester
  4. Line Up
  5. F2S6151/F2S3325

F2 Series


Extreme High Accuracy Testing is made possible through the use of Type9 Probe. F2S6151 corresponds to testing standard sized board with up to min. pad size of 15µm and min. pad pitch of 45µm. Whereas F2S3325 is specifically designed for testing general package boards such as CSP and Flip Chip up to min. pad size of 10µm and min. pad pitch of 40µm.

Specifications (F2S6151/F2S3325)
Max. Test Area24 x 20" (610x510mm) / 13 x 9.8" (330x250mm)
Number of Probes2 Upper
Min. Board Size2 x 2" (50x50mm)
Max. Board Thickness for Clamping0.16" (4mm)
Untestable Area
Repeatable Accuracy±0.08mil (±2µm) / ±0.04mil (±1µm)
Resolution0.04mil (1µm) / 0.04mil (1µm)
Min. Pad Pitch *11.8mil (45µm) / 1.6mil (40µm)
Min. Pad Size *20.6mil (15µm) / 0.4mil (10µm)
Test Voltage of Resistance MeasurementContinuity test: 0-10V
Isolation test: 250V(500V/1000V option)
Test Current of Resistance MeasurementContinuity test: 2.5µA-150mA
Clamp SystemVacuum Style
CCD Camera2 Upper
Air Requirements Pressure: 0.5MPa / N/A
Consumption: 0.02ft³/min.(0.6ℓ/min.) / N/A
Power Supply *38A (Single Phase AC200-240V 50/60Hz)
Weight 1587lbs. (720kg) / 1543lbs. (700kg)
Dimensions *4
[ Unit: inch(mm) ]
*1With T98MC-PB-0R80 probe.
*2With T98MC-PB-0B00 probe.
*3Power Supply: There may be cases with inrush current equaling to 10 times of the rated and flowing when the power is turned ON. Please choose the breaker that will not cause any malfunction by such inrush current.
*4Door design may defer depending on the specification.
System Requirements
System Requirements1) Control PC & Monitor
2) PC & Monitor for Test Data Editing.
1) and 2) can be completed in one PC.
* Please inquire our sales for PC specification.
Probe TypeUsers can choose one of different types of probes depending on tester models. Please ask our sales for specifications of each probe & PC.
SoftwareEMMA2010 for Control PC is included,
but all other software is optional (supporting OS are
Windows 7 / Windows 8 / Windows 10).
Operating Conditions· 70-75°F (21-24°C), 30-70% relative humidity
Do not use under the environment that has heavy condensing, dust, vibration, and/or corrosive gas.
· Atmospheric Dew Point: -14°C or below (at 0.7Mpa, dew point is 15°C or below)
· Oil Mist Concentration: 1mg/㎥ (ANR) or below