2. Products
  3. Moving Probe Tester
  4. Line Up
  5. F2M9172/SH/SH2

F2 Series


Larger Size Model corresponds to larger board, touch panel, and glass boards.
Larger Size Model connected to the shuttle table achieved dramatic increase in throughput production. SH stands for single shuttle (shuttle x1) and SH2 stands for dual shuttle (shuttle x2).
Shuttle Table

Specifications (F2M9172/SH, SH2)
Max. Test Area35.8 x 28.3" (910x720mm)
Number of Probes2 Upper
Min. Board Size2 x 2" (50x50mm)
Max. Board Thickness for Clamping0.4" (10mm)
Untestable Area
Repeatable Accuracy±0.16mil (±4µm)
Resolution0.08mil (2µm)
Min. Pad Pitch *14.8mil (120µm) / 70mil (180µm)
Min. Pad Size *12.4mil (60µm)
Test Voltage of Resistance MeasurementContinuity test: 0-10V
Isolation test: 250V(500V/1000V option)
Test Current of Resistance MeasurementContinuity test: 2.5µA-150mA
Clamp SystemVacuum Style
CCD Camera2 Upper
Air Requirements Pressure: 0.5MPa
Consumption: 0.02ft³/min.(0.6ℓ/min.)
Power Supply *210A / 8A
(Single Phase AC200-240V 50/60Hz)
Weight 2206lbs. (1000kg) /
SH: 3307lbs. (1500kg), SH2: 4409lbs. (2000kg)
Dimensions *3
[ Unit: inch(mm) ]
*1With T96MC-PB-0R40 probe.
*2Power Supply: There may be cases with inrush current equaling to 10 times of the rated and flowing when the power is turned ON. Please choose the breaker that will not cause any malfunction by such inrush current.
*3Door design may defer depending on the specification.
System Requirements
System Requirements1) Control PC & Monitor
2) PC & Monitor for Test Data Editing.
1) and 2) can be completed in one PC.
* Please inquire our sales for PC specification.
Probe TypeUsers can choose one of different types of probes depending on tester models. Please ask our sales for specifications of each probe & PC.
SoftwareEMMA2010 for Control PC is included,
but all other software is optional (supporting OS are
Windows 7 / Windows 8 / Windows 10).
Operating Conditions· 70-75°F (21-24°C), 30-70% relative humidity
Do not use under the environment that has heavy condensing, dust, vibration, and/or corrosive gas.
· Atmospheric Dew Point: -14°C or below (at 0.7Mpa, dew point is 15°C or below)
· Oil Mist Concentration: 1mg/㎥ (ANR) or below